ACH550-UH User’s Manual 1-135
Parameters
3204 SUPERV 2 PARAM 100…178 1 104 (CURRENT)
Selects the second supervised parameter. See 3201
SUPERV 1 PARAM above.
3205 SUPERV 2 LIM LO Depends on selection - 1.0 · I
2n
A
Sets the low limit for the second supervised parameter. See 3204
SUPERV 2 PARAM above.
3206 SUPERV 2 LIM HI Depends on selection - 1.0 · I
2n
A
Sets the high limit for the second supervised parameter. See 3204
SUPERV 2 PARAM above.
3207 SUPERV 3 PARAM 100…178 1 105 (TORQUE)
Selects the third supervised parameter. See 3201
SUPERV 1 PARAM above.
3208 SUPERV 3 LIM LO Depends on selection - 100.0%
Sets the low limit for the third supervised parameter. See 3207 SUPERV 3 PARAM above.
3209 SUPERV 3 LIM HI Depends on selection - 100.0%
Sets the high limit for the third supervised parameter. See 3207
SUPERV 3 PARAM above.
Group 32: Supervision
Code Description Range Resolution Default S
To Next Page
Loading...
