Need help?Do you have a question about the ABB ACH580-BDR and is the answer not in the manual?
General| Cooling Method | Air-cooled |
|---|---|
| Product Type | Variable Frequency Drive |
| Output Current | Varies with power rating |
| Control Method | Sensorless vector control, Vector control |
| Communication Protocols | Modbus, Profibus, CANopen, Ethernet/IP |
| Enclosure Rating | IP21 |
| Mounting Type | Wall-mounted, Floor-mounted |
| Operating Temperature | -15°C to +50°C (with derating above +40°C) |
| Storage Temperature | -40 to +70 °C |
| Relative Humidity | 5 to 95% (non-condensing) |
| Altitude | Up to 1000 m |
| Protection Features | Overcurrent, Overvoltage, Undervoltage, Overtemperature |
Essential safety guidelines for personnel involved in installing, starting up, and maintaining the drive.
Crucial electrical safety precautions for installation, start-up, and maintenance personnel.
Procedures for starting up the E-Clipse Bypass, including parameter configuration.
Comprehensive list and explanation of bypass parameters, essential for configuration and operation.
Steps for configuring serial communications using the embedded fieldbus (EFB) for system integration.
A detailed table of faults, possible causes, and corrective actions for troubleshooting.
To Next Page
