Need help?Do you have a question about the ABB ACH580-PCR and is the answer not in the manual?
General| Output Voltage | 0 to Input Voltage |
|---|---|
| Cooling Method | Air-cooled |
| Category | DC Drives |
| Input Voltage | 380 to 480 V |
| Control Method | Sensorless vector control |
| Communication Protocols | Modbus RTU, Ethernet/IP, BACnet MS/TP, PROFIBUS DP |
| Protection Class / Enclosure Rating | IP21 |
| Protection Features | Overload protection, Short-circuit protection, Earth fault protection |
| Mounting | Wall-mounted |
Provides essential safety instructions for all personnel involved in the installation, start-up, and maintenance of the drive.
Details specific electrical safety precautions and procedures required before beginning any installation or maintenance work on the drive.
Explains the Advanced Override mode's functionality, activation, and how it affects system response to inputs and faults.
Provides a comprehensive listing and detailed descriptions of all system parameters, including their codes, names, ranges, defaults, and functions.
Guides users through the process of setting up serial communication for the EFB protocol, including parameter configuration and logical connections.
Explains how to configure the drive for fieldbus control, including start/stop, direction, reference, and relay output functions.
Offers a systematic approach to diagnosing and resolving issues encountered with the EFB network, detailing symptoms, causes, and corrective actions.
Details the protocol selection and configuration process for FBA modules, including parameter mapping and settings.
Covers diagnostic procedures for FBA modules, including fault handling, communication diagnostics, and troubleshooting common network issues.
Provides a fault listing table with fault codes, names, possible causes, and recommended corrective actions for troubleshooting.
Lists and describes various system warnings, including their codes, panel names, possible causes, and corrective actions.
To Next Page
