Need help?Do you have a question about the ABB ACH550 and is the answer not in the manual?
General| Power range | 0.75 kW to 355 kW |
|---|---|
| IP Rating | IP21 |
| Communication | Modbus |
| Control method | Scalar control (V/f), Sensorless vector control (SLVC), Flux vector control (FVC) |
| EMC filter | Built-in or external |
Defines types of safety instructions, warnings, and notes used in the manual.
Describes the purpose and general use of the ACH550 E-Bypass.
Lists the key features and capabilities of the E-Bypass system.
Provides a step-by-step graphical outline for installing the unit.
Details drive identification, type code interpretation, and initial setup.
Covers general wiring requirements and best practices for installation.
Instructions for connecting the main power input to the unit.
Instructions for connecting the motor to the E-Bypass unit.
Guidelines for connecting control signals and communication.
Procedures for testing the keypad and system operation.
Guide to verifying and adjusting configuration settings on the control board.
Overview of the control panel's keys, LEDs, and indicators.
Explanation of different system modes like Drive, Bypass, Hand, Auto, etc.
Details on available inputs and outputs for external control connections.
Information on inputs and outputs shared between the ACH550 and E-Bypass.
Configurations and connections for utilizing the bypass macro.
Information on power input, branch circuit protection, and fuses.
Specifications for drive input fuses for various voltage ranges.
Details on wire size capacities for power terminals.
Information on bypass contactors and motor overload protection.
Specifications for connecting cables to the E-Bypass control panel.
Physical dimensions and mounting hole locations for different enclosures.
Typical weights of the E-Bypass units by frame size and enclosure type.
Lists the standards that the E-Bypass configuration conforms to.
To Next Page
