Parameter 95.01 displays the supply voltage selected
manually.
Press (Back) repeatedly to go back to the Main menu.
In the Main menu, select First start assistant and press
(Select) to enter the First start assistant menu.
Continue with the following steps.
Start-up with the First start assistant
Have the motor name plate data at hand.
Power up the drive.
The First start assistant guides you through the first start-up.
The assistant begins automatically. Wait until the control
panel enters the view shown on the right
Select the language you want to use by highlighting it (if not
already highlighted) and pressing (OK).
Note: After you have selected the language, it takes a few
minutes to download the language file to the control panel.
Select Commission the ACH580 and press (Next).
6 EN – Quick start-up guide
EN
DE
ES
FI
FR
IT
NL
PT
RU
SV
To Next Page
Loading...
