ABB ACH580-VCR - Binary Output Object Summary - Drive

124 ACH580 E-Clipse bypass and packaged drive user manual
Embedded fieldbus
Note: For Present Value Access Types, R = Read-only, W = Writeable,
C = Commandable. Commandable values support priority arrays and relinquish
defaults.
Binary output object instance summary – Drive
The following table summarizes the Binary Output Objects supported:
BI4 RO 5 ACT This object indicates the status of Relay
Output 5 (requires CMOD-01 or
CHD-01 option).
ON/OFF R
BI5 DO 1 ACT This object indicates the status of Relay
Output 6 (requires CMOD-01 option).
ON/OFF R
BI6 DI 1 ACT This object indicates the status of Digital
Input 1.
ON/OFF R
BI7 DI 2 ACT This object indicates the status of Digital
Input 2.
ON/OFF R
BI8 DI 3 ACT This object indicates the status of Digital
Input 3.
ON/OFF R
BI9 DI 4 ACT This object indicates the status of Digital
Input 4.
ON/OFF R
BI10 DI 5 ACT This object indicates the status of Digital
Input 5.
ON/OFF R
BI11 DI 6 ACT This object indicates the status of Digital
Input 6.
ON/OFF R
Instance
ID
Object Name Description
Active/
Inactive Text
Present Value
Access Type
BO0 RO1 CMD This object controls the output stateof
Relay 1. This control requires that drive
parameter 10.24 value = 62 (RO/DIO
CONTROL WORD).
ON/OFF C
BO1 RO2 CMD This object controls the output state of
Relay 1. This control requires that drive
parameter 10.27 value = 62 (RO/DIO
control word).
ON/OFF C
BO2 RO3 CMD This object controls the output state of
Relay 1. This control requires that drive
parameter 10.30 value = 62 (RO/DIO
control word).
ON/OFF C
BO3 RO4 CMD This object controls the output state of
Relay 1. This control requires that drive
parameter 15.07 value = 62 (RO/DIO
control word). Also requires CMOD-01
option.
ON/OFF C
Instance
ID
Object
Name
Description
Active/
Inactive Text
Present Value
Access Type