144 ACH580 E-Clipse bypass and packaged drive user manual
Embedded fieldbus
For the Modbus protocol, drive parameters in group 58 report the parameter
mapping to 4xxxxx Registers.
400011 Actual 7.
(select using bypass
parameter 58111)
R By default, stores nothing. Use bypass parameter 5316
to select an actual value for this register.
400012 Actual 8.
(select using bypass
parameter 58112)
R By default, stores nothing. Use bypass parameter 5317
to select an actual value for this register.
400031 DCU CONTROL
WORD LSW
R/W Maps directly to the Least Significant Word of the DCU
profile’s
CONTROL WORD. Supported only if BP Param
5825 = 1. See bypass parameter 0301.
400032 DCU CONTROL
WORD MSW
R Maps directly to the Most Significant Word of the DCU
profile’s
CONTROL WORD. Supported only if BP Param
5825 = 1. See bypass parameter 0302.
400033 DCU STATUS
WORD LSW
R Maps directly to the Least Significant Word of the DCU
profile’s
CONTROL WORD. Supported only if BP Param
5825 = 1. See bypass parameter 0303.
400034 DCU STATUS
WORD MSW
R Maps directly to the Most Significant Word of the DCU
profile’s
CONTROL WORD. Supported only if BP Param
5825 = 1. See bypass parameter 0304.
400045 ACH580 REF1 LSW R/W Maps directly to the Least Significant Word of the DCU
profile’s
REF1. Supported only if BP Parameter
5825 = 1. See drive parameter 03.09, EFB reference 1.
400046 ACH580 REF1 MSW R/W Maps directly to the Most Significant Word of the DCU
profile’s
REF1. Supported only if BP Parameter
5825 = 1. See drive parameter 03.09, EFB reference 1.
400047 ACH580 REF2 LSW R/W Maps directly to the Least Significant Word of the DCU
profile’s
REF2. Supported only if BP Parameter
5825 = 1. See drive parameter 03.10, EFB reference 2.
400048 ACH580 REF2 MSW R/W Maps directly to the Most Significant Word of the DCU
profile’s
REF2. Supported only if BP Parameter
5825 = 1. See drive parameter 03.10, EFB reference 2.
1) These Modbus Register numbers are selected using drive parameters 58.28 and 58.29.
2) These Modbus Register numbers are selected using drive parameters 58.28 and 58.29.
BP Param Description
58107 DV IO 7
Specifies the parameter mapped to Modbus register 400007.
58108 DV IO 8
Specifies the parameter mapped to Modbus register 400008.
58109 DV IO 9
Specifies the parameter mapped to Modbus register 400009.
58110 DV IO 10
Specifies the parameter mapped to Modbus register 400010.
58111 DV IO 11
Specifies the parameter mapped to Modbus register 400011.
58112 DV IO 12
Specifies the parameter mapped to Modbus register 400012.
5318 Reserved.
Modbus Register Access Remarks
To Next Page
Loading...
