ABB ACQ580-31 - Page 41

Mechanical installation for ACS880-01 41
5. Attach the side brackets to the drive. Note that R4 has 6 screws for attaching the
side brackets while R5 has 8 screws.
6. Attach the bottom bracket and the tightening bracket to the side brackets.
R4: 6 × M6×10 screw T30
R5: 8 × M6×10 screw T30
8 N·m
4 × M6 nut 10 N·m
2 × M6×20 screw 6 N·m