ABB ACQ80-04 - User Manual

—
ABB DRIVES FOR WATER
ACQ80-04 standard control program
Firmware manual
to do
ES
FI
FR
IT
RU
ACQ80 FW.book Page 1 Thursday, February 14, 2019 11:33 AM

ABB ACQ80-04 Specifications

General

Brand	ABB
Model	ACQ80-04
Category	DC Drives
Language	English

Summary

1. Introduction to the Manual

2. Start-up, Control with I;O and ID Run

Identification (ID) Run

Procedure for the drive to identify motor characteristics for optimal control.

4. Program Features

6. Parameters

Summary of Parameter Groups

Provides an overview of all parameter groups, their contents, and corresponding page numbers.

Introduction to the Manual

Safety Instructions

Crucial safety guidelines for safe drive operation and maintenance.

Start-up, Control with I;O and ID Run

How to Start Up the Drive

Detailed steps for initializing the drive using the basic control panel.

ID Run Procedure

Step-by-step guide on how to perform the motor identification routine.

Program Features

Parameters

Parameter Listing

Detailed listing of parameters with their names, values, descriptions, and default/fieldbus equivalents.

50 Fieldbus Adapter (FBA)

FBA A Settings

Configuration parameters for the Fieldbus Adapter A module.

FBA A Data In

58 Embedded Fieldbus

8. Fault Tracing

Warnings and Faults

Explains abnormal drive statuses, codes, and how warnings differ from faults.

9. Fieldbus Control through the Embedded Fieldbus Interface (EFB)

Setting up the Embedded Fieldbus Interface

10. Fieldbus Control through a Fieldbus Adapter

System Overview

Parameter Setting Example: FPBA (PROFIBUS)

11. Parameterization with Drive Composer

Drive Composer Overview

12. Parameterization with Automation Builder Drive Manager

Automation Builder Drive Manager