ABB ACQ80-04 - Control Macros; Contents of this Chapter; Overview

Control macros 55
5
Control macros
Contents of this chapter
This chapter describes the intended use and operation of the application macros. It
also includes the default control connections and list of default parameter values for
each macro.
The settings and the example referred in this chapter are with respect to the basic
control panel. However, you can also perform these actions using the assistant
control panel. See Using the control panel (page 27).
Overview
Control macros are set of default parameter values suitable for a certain control
configuration. When starting the drive, the user typically selects the best-suited
control macro as a starting point and then makes necessary changes to tailor the
settings to meet the requirements.
Control macros has the following features:
• Results in a much lower number of user edits compared to the traditional way of
programming a drive.
• Allows quick configuration of the drive and enables quick start of the motor.
There are two ways of selecting the control macro:
• Main menu
→ Connection macro → Macro
or
• Main menu
→ Parameters → Complete parameter list → Parameter
96.04
Notes:
• Scalar control is the default control mode for all macros
ACQ80 FW.book Page 55 Thursday, February 14, 2019 11:33 AM