Parameters 71
03.09 EFB reference 1 Shows scaled reference 1 received through the embedded
fieldbus interface.
1 = 10
-30000.00…
30000.00
Scaled reference 1 received through the embedded fieldbus
interface.
1 = 10
03.10 EFB reference 2 Shows scaled reference 2 received through the embedded
fieldbus interface.
1 = 10
-30000.00…
30000.00
Scaled reference 2 received through the embedded fieldbus
interface.
1 = 10
04
04 Warnings and faults
Information on warnings and faults that occurred last.
For explanations of individual warning and fault codes, see
chapter Fault tracing.
All parameters in this group are read-only unless otherwise
noted.
04.01 Tripping fault Shows code of the 1st active fault (the fault that caused the
current trip).
0x0000
0x0000...0xffff 1st active fault. 1 = 1
04.02 Active fault 2 Shows code of the 2nd active fault. 0x0000
0x0000...0xffff 2nd active fault. 1 = 1
04.03 Active fault 3 Shows code of the 3rd active fault. 0x0000
0x0000...0xffff 3rd active fault. 1 = 1
04.06 Active warning 1 Shows code of the 1st active warning. 0x0000
0x0000...0xffff 1st active warning. 1 = 1
04.07 Active warning 2 Shows code of the 2nd active warning. 0x0000
0x0000...0xffff 2nd active warning. 1 = 1
04.08 Active warning 3 Shows code of the 3rd active warning. 0x0000
0x0000...0xffff 3rd active warning. 1 = 1
04.11 Latest fault Shows code of the 1st stored (non-active) fault. 0x0000
0x0000...0xffff 1st stored fault. 1 = 1
04.12 2nd latest fault Shows code of the 2nd stored (non-active) fault. 0x0000
0x0000...0xffff 2nd stored fault. 1 = 1
04.13 3rd latest fault Shows code of the 3rd stored (non-active) fault. 0x0000
0x0000...0xffff 3rd stored fault. 1 = 1
04.16 Latest warning Shows code of the 1st stored (non-active) warning. 0x0000
0x0000...0xffff 1st stored warning. 1 = 1
04.17 2nd latest warning Shows code of the 2nd stored (non-active) warning. 0x0000
0x0000...0xffff 2nd stored warning. 1 = 1
04.18 3rd latest warning Shows code of the 3rd stored (non-active) warning. 0x0000
0x0000...0xffff 3rd stored warning. 1 = 1
05
05 Diagnostics
Various run-time-type counters and measurements related to
drive maintenance.
All parameters in this group are read-only unless otherwise
noted.
05.01 On-time counter On-time counter. The counter runs when the drive is powered 0
0…65535 d On-time counter. 1 = 1 d
No. Name/Value Description Def/FbEq16
ACQ80 FW.book Page 71 Thursday, February 14, 2019 11:33 AM
To Next Page
Loading...
