Need help?Do you have a question about the ABB ACQ580-01 Series and is the answer not in the manual?
General| Series | ACQ580-01 |
|---|---|
| Category | DC Drives |
| Output Voltage Range | 0 to Input Voltage |
| Input Voltage | 380 to 690 V |
| Control Method | Vector control |
| Communication Protocols | Ethernet |
| Environmental Rating | IP55 |
| Protection Features | Overcurrent, overvoltage, short circuit, overtemperature |
Essential safety precautions and capacitor reforming check before installation.
Steps for selecting cables, ensuring cooling, protection, mounting, and insulation checks.
Procedures for safely powering down the drive and opening the cover.
Verifying compatibility with IT/TN systems, covering EMC filter and varistor, and disconnection.
Step-by-step guide on how to disconnect EMC filter or ground-to-phase varistor.
Detailed steps for connecting motor and input power cables, including grounding.
Instructions for connecting analog and digital signal cables to the control board.
Diagram showing default I/O connections for the Water configuration.
Guidance on installing any optional modules as per electrical installation chapter.
Instructions for properly reattaching the drive covers.
Essential safety precautions and capacitor reforming check before installation.
Steps for selecting cables, ensuring cooling, protection, and fuse selection.
Mounting instructions and insulation resistance checks for cables and motor.
Procedures for safely powering down the drive and opening the cover.
Verifying compatibility with IT/TN systems, covering EMC filter and varistor, and disconnection.
Step-by-step guide on how to disconnect EMC filter or ground-to-phase varistor.
Detailed steps for connecting motor and input power cables, including grounding and shroud installation.
Instructions for connecting analog and digital signal cables to the control board.
Diagram showing default I/O connections for the Water configuration.
Guidance on installing optional modules as per electrical installation chapter.
Instructions for reattaching module, box, and front covers.
To Next Page
