ABB ACQ580-01 Series - Optional Modules and Cover Reinstallation; Optional Module Installation; Reinstalling Drive Covers

26
R0-
R4
R5
R6-
R9
EN
DE
ES
FR
IT
RU
SV
Install optional modules, if any
See chapter Electrical installation in ACQ580-01 (0.75 to 250 kW) hardware manual
(3AXD50000035866 [English]).
Reinstall cover
See figure I on page 92.
1. Put the tabs on the inside of the cover top in their counterparts on the housing
(1a) and then press the cover at the bottom (1b).
2. Tighten the retaining screw with a screwdriver.
For start-up instructions, see chapter EN – Quick start-up guide on page 175.