Need help?Do you have a question about the ABB ACQ550-x1-06A6-2 and is the answer not in the manual?
Core documentation including safety, installation, control panels, and parameters.
Guides related to drive maintenance procedures and schedules.
Manuals for optional equipment like fieldbus adapters and I/O modules.
Explains safety instructions, warnings, and symbols used throughout the manual.
Visual representation of the installation steps.
Steps for lifting, unpacking, and identifying the drive before installation.
Step-by-step procedure for physically mounting the drive onto a surface.
General information on wiring requirements, conduit/gland kits, and terminal connections.
Pre-application of power checks to ensure correct installation.
Guides on performing guided or limited start-up procedures.
Procedure for the drive's self-calibration to estimate motor characteristics.
Instructions on operating the drive via digital and analog inputs.
Describes the features of the ACQ550 W/WW control panel.
Lists the different operating modes for the control panel.
How to view drive fault history and state details.
How to export and upload parameters to/from the control panel.
Default macro for general purpose 2-wire I/O configuration.
Macro for momentary push-button control with three constant speeds.
Macro for closed-loop control systems like pressure or flow control.
Lists default parameter values for each macro.
Comprehensive list of all drive parameters with details.
Defines special start-up data for drive setup and motor information.
Defines how the motor starts and stops, supporting various modes.
Defines fault detection situations and drive responses.
Defines parameters for the Process PID (PID1) controller.
Configures set-up variables for a fieldbus adapter (FBA) module.
Explains how ACQ550 accepts control via standard serial communication protocols.
Steps to activate and configure serial communication for the embedded fieldbus.
Configuration for fieldbus control of drive functions.
Pre-defined feedback meanings established by the protocol.
Information on fault tracing and diagnostic features for EFB.
Introduces the plug-in fieldbus adapter (FBA) module.
Procedures for installing the FBA module into the drive's expansion slot.
Steps to activate and configure serial communication for the FBA module.
Details on the ABB Drives profile, applicable to FBA modules.
Principal means of controlling the drive from a fieldbus system.
Status information sent by the drive to the master station via fieldbus.
Describes reference scaling for ABB Drives and DCU profiles.
Explains scaling of integers sent to fieldbus as Actual Values.
How the drive reports error situations using LEDs and panel displays.
How the drive signals severe errors using red LED and Fault Word.
Recommended corrective actions for diagnosed faults.
Lists faults by code, name, description, and corrective action.
Lists routine maintenance intervals recommended by ABB.
Instructions for checking and cleaning the heatsink.
Procedure for replacing the drive's main cooling fan.
Procedure for replacing the internal enclosure fan for IP54/UL type 12.
Information on reforming and replacing drive DC link capacitors.
Maintenance information for the ACQ Control Panel, including cleaning and battery.
Provides drive ratings including IEC, NEMA, and frame size by type designation.
Explains how load capacity decreases in specific situations and the need for oversizing.
Warnings and specifications for connecting input power to the drive.
Safety and operational requirements for grounding the drive and motor.
Details requirements for motor cable shields for CE/C-Tick compliance.
Availability of braking components (choppers, resistors) by frame size.
Warnings and specifications for connecting the motor to the drive.
Maximum motor cable lengths for 400V and 600V drives.
Specifications for drive cooling, including fan and space requirements.
Information on ACQ550 dimensions and mass based on frame size.
Diagrams and tables of outside dimensions for IP21/UL type 1 enclosures.
Lists typical maximum weights for each frame size and enclosure type.
Details the IP/UL ratings and environmental protection offered by enclosures.
Lists environmental requirements for installation, storage, and transportation.
Lists standards the drive complies with, identified by marks on the type designation label.
Explains UL and CSA marks and drive suitability for circuits.
Defines EMC terms like first/second environment and drive categories C2/C3.
Specific installation instructions for Category C2 drives.
To Next Page
General
