ABB ACQ550-x1-06A6-2 - 1402 Relay Output 2

102 ACQ550-U1 User’s Manual
Parameters
35 = COMM – Energize relay based on input from fieldbus communication.
• Fieldbus writes binary code in parameter 0134 that can energize relay 1…relay 6 according to the following:
• 0 = De-energize relay, 1 = Energize relay.
36 =
COMM(-1) – Energize relay based on input from fieldbus communication.
• Fieldbus writes binary code in parameter 0134 that can energize relay 1…relay 6 according to the following:
• 0 = De-energize relay, 1 = Energize relay.
37 =
TIMED FUNC 1 – Energize relay when Timed Function 1 is active. See Group 36: TIMED FUNCTIONS.
38…40 =
TIMED FUNC 2…4 – Energize relay when Timed Function 2…4 is active. See TIMED FUNC 1 above.
41 =
MNT TRIG FAN – Energize relay when cooling fan counter is triggered. See Group 29: MAINTENANCE TRIG.
42 =
MNT TRIG REV – Energize relay when revolutions counter is triggered. See Group 29: MAINTENANCE TRIG.
43 =
MNT TRIG RUN – Energize relay when run time counter is triggered. See Group 29: MAINTENANCE TRIG.
44 =
MNT TRIG MWH – Energize relay when MWh counter is triggered. See Group 29: MAINTENANCE TRIG.
46 =
START DELAY – Energize relay when a start delay is active.
47 =
USER LOAD C – Energize relay when a user load curve fault or alarm occurs.
52 =
JOG ACTIVE – Energize relay when the jogging function is active.
1402 RELAY OUTPUT 2
Defines the event or condition that activates relay 2 – what relay output 2 means.
• See 1401
RELAY OUTPUT 1.
1403 RELAY OUTPUT 3
Defines the event or condition that activates relay 3 – what relay output 3 means.
• See 1401
RELAY OUTPUT 1.
1404 RO 1 ON DELAY
Defines the switch-on delay for relay 1.
• On / off delays are ignored when relay output 1401 is set to PFC.
1405 RO 1 OFF DELAY
Defines the switch-off delay for relay 1.
• On / off delays are ignored when relay output 1401 is set to PFC.
1406 RO 2 ON DELAY
Defines the switch-on delay for relay 2.
•See
RO 1 ON DELAY.
1407 RO 2 OFF DELAY
Defines the switch-off delay for relay 2.
•See
RO 1 OFF DELAY.
1408 RO 3 ON DELAY
Defines the switch-on delay for relay 3.
•See
RO 1 ON DELAY.
Code Description
Par. 0134 Binary RO6 RO5 RO4 RO3 RO2 RO1
0 000000 0 00000
1 000001 0 00001
2 000010 0 00010
3 000011 0 00011
4 000100 0 00100
5…62 … … ……………
63 111111 1 11111
Par. 0134 Binary RO6 RO5 RO4 RO3 RO2 RO1
0 000000 1 11111
1 000001 1 11110
2 000010 1 11101
3 0000111 11100
4 000100 1 11011
5…62 … … ……………
63 111111 0 00000
1404 ON DELAY 1405 OFF DELAY
Control event
Relay status