Program features 51
Miscellaneous
Backup and restore
You can make backups of the settings manually to the control panel and can restore
backup to the drive, or a new drive that is replacing a faulty drive. You can also make
backups and restore on the panel with the Drive composer PC tool.
Backup
Manual backup
You can make a backup when necessary, for example, after you have started up the
drive or when you want to copy the settings to another drive.
Parameter changes from fieldbus interfaces are ignored unless you have forced
parameter saving with parameter 96.07 Parameter save manually.
Automatic backup
The control panel has a dedicated space for one automatic backup. An automatic
backup is created two hours after the last parameter change. After completing the
backup, the panel waits for 24 hours before checking for additional parameter
changes. If any changes exist, it creates a new backup overwriting the previous one
when two hours have passed after the latest change.
Notes:
• You cannot adjust the delay time or disable the automatic backup function.
• Parameter changes from fieldbus interfaces are ignored unless you have forced
parameter saving with parameter 96.07 Parameter save manually.
Restore
The backups are shown on the panel.
• Automatic backup is marked with icon and
• Manual backup is marked with icon .
To restore a backup, select it and press . In the following display you can view
backup contents and restore all parameters or select a subset to be restored.
Note: To restore a backup, the drive must be in Local control.
Settings
• Main menu
→ Backup data
• Parameter 96.07 Parameter save manually (page 166).
ACQ80 FW.book Page 51 Thursday, February 14, 2019 11:33 AM
To Next Page
Loading...
