ABB ACS2000 AFE 2MVA - Page 106

CHAPTER 6 – ELECTRICAL INSTALLATION 106
Preparing cables for cable entries with cable
glands
• On the length of cable which passes through
the conductive part of the cable gland, remove
the outer cable sheath to bring the conductive
foil of the sealing module (2) in contact with the
cable shield (3).
—
References
—
6-12 Preparing control
cables for cable glands
—
6-12
Outer cable sheath
Cable gland
Conductor insulation removed to expose cable shield
Plate
Conductor screen extension to be connected to PE ter-
minal
1
2
3
4
5
1
2
3
4
5