ABB ACS2000 DFE - Page 118

118 ACS2000 DFE UM 3BHS360367 ZAB E01 REV. K
—
9.1 Overview
The panel messages and parameter settings used in this chapter are
typical examples to illustrate the related instructions and display
functions and may therefore differ from the actual messages and
parameter settings in the drive.
9.1.1 Display and keypad
The CDP control panel features a 4-line LCD display
and a 16-key keypad. The keys are identified in 9-1.
—
References
—
9-1 CDP control panel
—
9-1
.
..
1242,0 rpm
1 L ->
StateINU
ReadyOn
1242 rpm
MOTOR SP
86.0 kW
POWER
1. Display
2. Keypad
3. Mode selection keys
4. Fast navigation keys, select and / or change a
value fast
5. Slow navigation keys, select and / or change a
value slowly
6. Enter key, terminates a procedure
7. Local / remote selection key
8. Reset key
9. Reference key
10. Start key
11. Forward key
12. Backward key
13. Stop key
1
2
3
5
6
9
10
13
12
11
8
7
4