Need help?Do you have a question about the ABB ACS6000 and is the answer not in the manual?
General| Type | Medium Voltage Drive |
|---|---|
| Power Range | 3 MW to 100 MW |
| Output Power | 3 MW to 100 MW |
| Output Voltage | 2.3 kV to 4.16 kV |
| Cooling Method | Air or Water Cooling |
| Control Modes | Speed, Torque, Position |
| Fieldbus Communication | Profibus, Modbus, Ethernet |
| Protection Class | IP21, IP31, IP41, IP54 |
| Protection Features | Overcurrent, Overvoltage, Undervoltage, Overtemperature, Short circuit |
Outlines ABB's 7-step concept for safe work practices before electrical installations.
Explains how to identify ground buses and provides grounding diagrams.
Introduces procedures for preparing and routing power, ground, and bonding cables.
Guides on preparing and routing auxiliary, control, and serial communication cables.
Emphasizes that only qualified and authorized personnel should operate the drive.
Details the EXU control panel for controlling, reading status, and setting parameters.
Describes the grounding switch as a safety device and the door locking system.
Provides steps for starting the drive, including checks before startup.
Provides instructions for stopping the drive locally.
Explains how to select the drive's control location (local or remote).
Introduces maintenance tasks and associated safety precautions.
Details the procedure for de-energizing and grounding the drive using the local operator panel.
Details actions for removing and installing phase modules from ARU/INU.
Details testing and replacing auxiliary fan units in COU, WCU, and EXU cabinets.
To Next Page
