ABB ACS6000 - Fitting Sequence for Busbar Connectors; Fitting the Busbar Connectors

3BHS212794 E01 REV M ACS6000 USER MANUAL 251/278
10 PREVENTIVE AND CORRECTIVE MAINTENANCE
6. Check that the LEDs are lit as shown.
7. Check that tools and foreign objects are not left inside the cabinets.
8. Close and lock the doors.
9. Check that the power operating mode (POM) of the drive corresponds
to the busbar connectors fitted.
10. Start the drive according to the established procedures.
10.4.9.2 Fitting the busbar connectors
1. Shut down the drive according to the established procedures.
2. Fit the busbar connectors in the sequence shown in Fig. 10-22.
Figure 10-22 Fitting sequence for busbar connectors
1
2
1
2
3 4