05 MECHANICAL INSTALLATION
3BHS212794 E01 REV M ACS6000 USER MANUAL 100/278
5.5 Joining transport units
This section applies to drives that are delivered in multiple
transport units.
Join the transport units at the connection points that are indicated
in Fig. 5-1.
Note: Some of the connection points might not be accessible in certain
configurations. In such cases, you only need to join the connection points
that you can access.
Figure 5-1 Connection point locations on transport units
▲NOTICE
Risk of component damage!
• DO NOT move joined transport units with a crane!
• Use transport means, such as heavy load hydraulics rollers or air
cushions instead.
(1) Connection point locations (2) M6 x 16 (9ABA450093R0259
SCR-CBS-M6X16-8_8-FLZNNC)
2
To Next Page
Loading...
