06 ELECTRICAL INSTALLATION
3BHS212794 E01 REV M ACS6000 USER MANUAL 162/278
6.8.7.4 Routing cables in an EXU cabinet with an ED7Y type DCS800 converter
1. Unscrew the rectangular cover from the DCS800 unit.
Figure 6-40 DCS800 converter (ED7Y)
2. Connect the two optical fibers to the receptacles of channel CH0 (B)
on the COM-8x circuit board (A) according to the terminal numbers
printed on the marker sleeves.
Figure 6-41 COM-8x circuit board (A) in a DCS800 converter (ED7Y type) and a
detail of channel CH0 (B) on the board
(1) Control panel (2) Removable cover
To Next Page
Loading...
