ABB ACS6000 - Installing Roof Attachments; Roof Attachment Parts

3BHS212794 E01 REV M ACS6000 USER MANUAL 125/278
05 MECHANICAL INSTALLATION
5.11.2 Installing roof attachments
This section applies to marine drives.
The roof attachments prevent tilting of the cabinets and dampen
vibrations. Struts for attaching the cabinets to the wall of the drive room
are not supplied.
Note: For information on the fitting location, see “Appendix C –
Mechanical drawings”.
Figure 5-23 Roof attachment parts
Item Details ID number
(1) 2 x nuts M12 HZN 452198P1022
(2) 2 x washers 13 / 29 ST / ZN 9ABA450078P0007
(3) 2 x washers 17 x 30 x 3 9ABA450078P0008
(4) 2 x hex-head bolts M16 x 40 NB 312350P0464
(5) 1 x bracket 3BHB035997R0002
(6) 2 x spacers 3BHB032466R0001
(7) 1 x damping pad 3BHB035998R0001
(8) 1 x bracket 3BHB035997R0001
(9) 2 x damping
connectors
3BHB033405R0001
(10) 2 x plates 3BHB035999R0001
(11) 2 x washers 13 / 29 ST / ZN 9ABA450078P0007
(12) 2 x hex-head bolts M12 x 80 NB 312450P8127
1
2
3
4
5
6
7
8
9
10
11
12