ABB ACS6000 - Example of S800 I;O Station; Serial Communication Interfaces

10 PREVENTIVE AND CORRECTIVE MAINTENANCE
3BHS212794 E01 REV M ACS6000 USER MANUAL 228/278
Figure 10-5 Example of S800 I/O station
Note: For more information, see the following manuals:
• S800 I/O - General information and installation, user’s guide
• S800 I/O - Modules and termination unit, user’s guide
10.3.3.4 Serial communication interfaces
To identify the serial communication interface in the drive, see “Appendix
D – Wiring diagrams”. For more information on the device, select the
appropriate manual:
• "AF 100 fieldbus - NAFA-01 installation and start-up guide"
(3BFE58919837)
• "Modbus TCP - NETA-21 remote monitoring tool user manual"
(3AUA0000096939)
• "Modbus RTU - NMBA-01 installation and startup guide"
(3AFY58919772)
• "Profibus - NPBA-12 installation and startup guide" (3BFE64341588)
LED Color Indication
F Red Indicates failure
R Green Device is operating normally
W Yellow External fault or minor fault in the module
O Yellow Indicates an active signal
OSP Yellow Indicates an active signal
(Output Set as Predetermined)
1 1 1 1