EasyManua.ls Logo

ABB ACS6000 - Connect Wires to Terminal Block; Installing the Pressure Relief Vents; Pressure Relief Vents

ABB ACS6000
278 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3BHS212794 E01 REV M ACS6000 USER MANUAL 121/278
05 MECHANICAL INSTALLATION
2. Connect each wire to the terminal block according to the terminal
numbers printed on the marker sleeves.
Figure 5-17 Connect wires to terminal block
5.9 Installing the pressure relief vents
This section applies to drives with separately delivered pressure
relief vents.
Pressure relief vents are installed on the roofs of TEUs and COUs.
Figure 5-18 Pressure relief vents
Weight: ~26 kg
Length: 840 mm
Width: 520 mm
Height: 210 mm

Table of Contents

Related product manuals