ABB ACS6000 - Stopping the Drive

3BHS212794 E01 REV M ACS6000 USER MANUAL 193/278
08 OPERATION
The drive is now in “ReadyRef” to indicate that the drive system
is operating.
8.10 Stopping the drive
8.10.1 Stopping the drive locally
1. To stop the drive, press the STOP key on the control panel.
The motor stops according to the preset stop function. While the
motor stops, the status line of the display shows ReadyRef and the run
status message blinks.
Note: During the stop sequence, you can restart the drive by pressing
the START key.
The drive is now in stopping mode.
1 L -> 600.0 rpm I
StateINU ReadyRef
MOTOR SP 0.00 rpm
POWER 1000.0 kW
I0
1 L -> 600.0 rpm I
StateINU ReadyRef
MOTOR SP 300.00 rpm
POWER 20.0 kW
LOC RESET REF
REM
1 L -> 600.0 rpm 0
StateINU Stopping
MOTOR SP 0.00 rpm
POWER 0.0 kW