ABB ACS6000 - Air-To-Air Heat Exchangers (Type LT-5-5165-UL); Removing Air-To-Air Heat Exchangers

3BHS212794 E01 REV M ACS6000 USER MANUAL 117/278
05 MECHANICAL INSTALLATION
12. Check that the cables do not touch the DC busbars.
13. Fasten the heat exchanger to the roof with 14 self-tapping M6x12
screws (HAQN401205P0257).
5.8.2 Removing air-to-air heat exchangers
This section applies to drives that are delivered in several transport units.
Figure 5-14 Air-to-air heat exchangers (type LT-5-5165-UL)
Air-to-air heat exchangers must be removed and refitted where two
transport units are joined.
⚠ CAUTION
Heavy object!
An air-air height exchanger weighs approximately 65 kg.
• Observe the installation height of the heat exchanger as well as the
dimensions and weight of the heat exchanger.
• Take appropriate measures for removing and installing the heat
exchanger safely.