ABB ACS2000 DFE - Page 125

CHAPTER 9 – CDP CONTROL PANEL 125
9.5.5 Displaying a fault and resetting the fault
memory
1. To open the actual signals mode, press the ACT
key.
2. To change to the fault memory display, press a
fast navigation key.
3. To display a specific fault, press the slow navi-
gation keys. The UP key selects the previous,
the DOWN key the next fault.
4. To clear the fault memory, press the RESET key.
5. To return to the actual signals display, press a
fast navigation key.
9.5.6 Displaying and resetting an active fault
1. To display an active fault, press the ACT key.
2. To reset the fault, press the RESET key.
1 L ->
600.0 rpm
StateINU
MOTOR SP
POWER
ReadyOn
0.00 rpm
0.0 kW
1 L ->
600.0 rpm
1 LAST FAULT
+ PANEL LOST
0707730 12:30:02.3256
1 L ->
600.0 rpm
2LAST FAULT
+ AMC: Fault Class 1
9 H 38 MIN 48 S
1 L ->
600.0 rpm
1 LAST FAULT
H MIN S
1 L ->
600.0 rpm
StateINU
MOTOR SP
POWER
ReadyOn
0.00 rpm
0.0 kW
1 L ->
600.0 rpm
ACS2000
*** FAULT ***
MCB CloseControl
1 L ->
600.0 rpm
StateINU
MOTOR SP
POWER
ReadyOn
0.00 rpm
0.0 kW