ABB ACS320 series - Type designation key

Hardware description 11
Type designation key
The type designation contains information on the specifications and configuration of
the drive. You find the type designation on the type designation label attached to the
drive. The first digits from the left express the basic configuration, for example,
ACS320-03E-08A8-4. The optional selections are given after that, separated by +
signs, for example +J404. The explanations of the type designation selections are
described below.
ACS320-03X-08A8-4+J404+...
ACS320 product series
01 = 1-phase input
03 = 3-phase input
1-phase/3-phase
In format xxAy, where xx indicates the integer part and y the fractional part,
e.g, 08A8 means 8.8 A. For more information, see section Ratings on page 47.
2 = 200…240 V AC
4 = 380…480 V AC
Input voltage range
E = EMC filter connected, 50 Hz frequency
U = EMC filter disconnected, 60 Hz frequency
Configuration
J404 = ACS-CP-C basic control panel
1) 2)
J400 = ACH-CP-B advanced HVAC control panel
1)
R700 = ACS320 user’s manual in English (3AUA0000062599 [EN])
E202 = RFI filter (available for European market only)
1)
The ACS320 is compatible with panels that have the following panel revisions and panel
firmware versions. To find out the revision and firmware version of your panel, see chapter
Control panels, section Applicability in ACS320 user’s manual (3AUA0000062599 [English]).
2)
Available for North American market only.
Panel type Type code Panel revision Panel firmware version
Basic control panel
2)
ACS-CP-C M or later 1.13 or later
Advanced HVAC control panel ACH-CP-B X or later 2.04 or later
Options
Output current rating