13
6
Drill holes for M6 Rivet or Kalei nuts. Consider the hole size for the nuts.
Rivet/Kalei nuts are not included in the delivery.
Note: The mounting templates are different (size, number and position of
holes) for different frame sizes.
3 x M6 nuts
6 N·m (4.4 lbf·ft)
ACQ580-01 manuals
ACH580-01 manuals
ACS580-01 manuals
For dimensions, see the mounting
template delivered with the flange
mounting kit or ACS580-
01…+C135, ACH580-01…+C135 and
ACQ580-01…+C135 drives with
flange mounting kit supplement
(3AXD50000349821 [English]).
Go to www.abb.com/drives.
UL Type 12 only
UL Type 12 is fulfilled on the drive backside when the flange and hood
are installed. Hood is not required for IP55.
FrontBack
Hood (view from top)
Hood (view from
bottom)
9
8
h
1 × M6×25 screw
6 N·m (4.4 lbf·ft)
1 4 × M6×25 screw
6 N·m (4.4 lbf·ft)
i
11
12
R4 IP21 (UL Type 1) only
Remove the control panel (a) and cover (b) to install the auxiliary fan (ordering code
3AXD50000034334). Cut off the protective plate from the fan slot (c) and install the fan
(d). Make sure that the arrow on the fan points outwards. Connect the fan cable to FAN2.
1 × M6×25 screw
6 N·m (4.4 lbf·ft)
7
10
f
a
b
c
e
d
R4: X6
To Previous Page
Loading...
