Installation checklist 93
Installation checklist
What this chapter contains
This chapter contains an installation checklist.
Checklist
Check the mechanical and electrical installation of the drive before start-up. Go
through the checklist below together with another person.
WARNING! Only qualified electricians are allowed to commission the drive.
Read and obey the
Safety instructions
(page 9) in this manual. Ignoring the
safety instructions can cause injury or death.
Check that...
MECHANICAL INSTALLATION
The ambient operating conditions are allowed.
See
Mechanical installation
(page 27),
IEC data
(page 106) or
NEMA data
(page 119),
Ambient conditions
(page 126).
The unit is fixed properly on a vertical non-flammable wall.
See
Mechanical installation
(page 27).
The cooling air flows freely.
The motor and the driven equipment are ready for start.
See
Motor selection and compatibility
(page 36),
Motor connection
(page 124).
To Next Page
Loading...
