ABB ACS850 - Parameters; How to Select a Parameter and Change Its Value

Operation
21
Parameters
In the Parameters option, you can:
• view and change parameter values
• start, stop, change the direction and switch between local and remote control.
How to select a parameter and change its value
Step Action Display
1. Go to the Main menu by pressing if you are in the Output mode, otherwise
by pressing repeatedly until you get to the Main menu.
2. Go to the Parameters option by selecting PARAMETERS on the menu with
keys and , and pressing .
3. Select the appropriate parameter group with keys and .
Press .
4. Select the appropriate parameter with keys and . The current
value of the parameter is shown below the selected parameter. Here the
parameter 9906 MOT NOM CURRENT is used as an example.
Press .
5. Specify a new value for the parameter with keys and .
Pressing the key once increments or decrements the value. Holding the key
down changes the value faster. Pressing the keys simultaneously replaces the
displayed value with the default value.
MENU
EXIT
PARAMETERS
ASSISTANTS
CHANGED PAR
EXIT ENTER
00:00
MAIN MENU 1
LOC
ENTER
01 Actual values
02 I/O values
03 Control values
04 Appl values
06 Drive status
EXIT
SEL00:00
PAR GROUPS 01
LOC
99 Start-up data
01 Actual values
02 I/O values
03 Control values
04 Appl values
EXIT
SEL00:00
PAR GROUPS 99
LOC
SEL
9901 Language
English
9904 Motor type
9905 Motor ctrl mode
9906 Mot nom current
PARAMETERS
EXIT
EDIT
00:00
LOC
9901 Language
9904 Motor type
9905 Motor ctrl mode
9906 Mot nom current
0.0 A
PARAMETERS
EXIT
EDIT
00:00
LOC
EDIT
9906 Mot nom current
PAR EDIT
0.0 A
CANCEL SAVE
00:00
LOC
9906 Mot nom current
PAR EDIT
3.5 A
CANCEL SAVE
00:00
LOC