ABB ACS850 - Parameter Change Log; How to View Last Parameter Changes and Edit Parameters

Operation
46
Parameter Change Log
In the Parameter Change Log option, you can:
• view last parameter changes made via control panel or PC tool,
• edit these parameters,
• start, stop, change the direction and switch between local and remote control.
How to view last parameter changes and edit parameters
Step Action Display
1. Go to the Main menu by pressing if you are in the Output mode, otherwise
by pressing repeatedly until you get to the Main menu.
2. Go to the Parameter Change Log option by selecting PAR CHG LOG on the
menu with keys and , and pressing .
• If there are no parameter changes in the history, corresponding text will be
shown.
• If there are parameter changes in the history, the panel shows a list of the last
parameter changes starting from the most recent change. The order of the
changes is also indicated with a number in the top right corner (1 stands for
most recent change, 2 the second latest change etc.) If a parameter has been
changed twice, it is shown as one change in the list. The current value of the
parameter and the parameter change date and time are also shown below the
selected parameter. You can scroll the parameters with keys and .
3. If you want to edit a parameter, select the parameter with keys and
and press .
4. Specify a new value for the parameter with keys and .
• To save the new value, press .
• To cancel the new value and keep the original, press .
5. The parameter change is shown as the first one in the list of last parameter
changes.
Note: You can reset the parameter change log by setting the parameter 16.14
Reset ChgParLog to Reset.
MENU
EXIT
PARAMETERS
ASSISTANTS
CHANGED PAR
EXIT ENTER00:00
MAIN MENU 1
LOC
ENTER
No parameters
available
MESSAGE
LOC
00:00
9402 Ext IO2 sel
None
11.09.2008 12:04:55
9401 Ext IO1 sel
9402 Ext IO2 sel
LAST CHANGES
EXIT
EDIT
00:00
LOC
1
EDIT
9402 Ext IO2 sel
PAR EDIT
None
CANCEL SAVE00:00
[0]
LOC
SAVE
CANCEL
9402 Ext IO2 sel
PAR EDIT
FIO-01
CANCEL SAVE00:00
[1]
LOC
9402 Ext IO2 sel
FIO-01
12.09.2008 15:09:33
9402 Ext IO2 sel
9401 Ext IO1 sel
LAST CHANGES
EXIT
EDIT00:00
LOC
1