ABB ACS880-01 - Materials of frame R4

ACS880-01/04 +C132 marine type-approved drives 11
 Type code designation
Product overview – ACS880-04 +C132
The ACS880-04 +C132 is a marine type-approved ACS880-04 drive module.
 Type code designation
Mechanical installation
 Wall installation of frame sizes R1 to R3
Install the drive on the wall as described in the hardware manual.
 Wall installation of frame sizes R4 to R9
Install the drive on the wall as described in the applicable installation guide:
• Vibration dampers for ACS880-01 drives (frames R4 and R5, option +C131)
installation guide (3AXD50000010497 [English])
• Vibration dampers for ACS880-01 drives (frames R6 to R9, option +C131)
installation guide (3AXD50000013389 [English]).
 Cabinet installation of frame sizes R1 to R9
The drive can be installed into a cabinet without vibration dampers. See ACS880-01
cabinet installation supplement (3AUA0000145446 [English]).
 Cabinet installation of frame sizes R10 and R11
Install the drive module into a cabinet as described in the hardware manual.
CODE DESCRIPTION
+C131 Vibration dampers for frames R4 to R9 in wall installations. Not needed in cabinet
installations.
+C132 Marine type-approved drive. Includes common mode filter in frames R6 to R9.
Requires option +C131 in wall installations for frames R4 to R9.
CODE DESCRIPTION
+C132 Marine type-approved drive. Requires: option +E208.
+E208 Common mode filter