2
Getting started 23
Introduction 23
Receiving and checking 23
List of contents 23
Intermediate storage 23
Mounting 24
Introduction 24
Placing Arc Monitor 24
Mounting Arc Monitor 24
Mounting on wall 25
Mounting on a DIN rail 25
Mounting the HMI 26
Mounting the HMI on door 26
Mounting the Optical detector 27
Example 1, positioning Optical detector in a switch gear 28
Example 2, Mounting Optical detector in an apertures cubicle 29
Example 3, Mounting in a cir- cuit breaker cubicle 30
Connecting optical detectors 32
Connecting extension module (option) 33
Connecting CSU cable 34
Electrical connections 35
Introduction 35
Connecting HMI 35
Connecting optical detector 35
Connecting extension module (option) 35
Connecting Current Sensing Unit (option) 35
Electrical connections 36
Connecting the Arc Monitor 37
Configurations 39
Introduction 39
DIP switches 39
Breaker trip 40
DIP switches 3 and 4 to position 0 40
DIP switch 3 in position 0, DIP switch 4 to postiotion ON 40
DIP switch 3 to position ON and DIP switch 4 to position 0. 41
DIP switches 1, 2, 3 and 4 to position ON 41
Manual/Auto reset configuration 42
Current Sensing Unit(option) 43
No CSU connected 43
One (1) CSU connected 44
Two (2) CSU connected 44
Power on to the Arc Monitor 45
Checking power on Arc Monitor 45
Add/Remove module from the Arc Monitor or changing configuration 46
To Next Page
Loading...
Need help?
General