Human Machine Interface, functions
61
Chapter 7: Human Machine Interface, functions
Introduction The Human Machine Interface, HMI is used for all communication with the
user and also to confirm any changes.
If power is lost (max 48 hours) the Time and Date will be restored. After very
long power interruptions the Time and Date are set to a default value and
needed to be set by the user.
This chapter consists of the following sections:
•Overview HMI
• HMI functions
• HMI Menus
Prerequisites
Note!
The reader should have knowledge and act according to applicable safety
laws and standards as well as local safety instructions.
To Next Page