Electrical safety
This equipment complies with the requirements of CEI/IEC
the protection provided by the equipment may be impaired.
Symbols
equipment labelling:
Warning – refer to the manual for instructions
Caution – risk of electric shock
Direct current supply only
Alternating current supply
Both direct and alternating current supply
The equipment is protected through double
insulation
Information in this manual is intended only to assist our
customers in the efficient operation of our equipment. Use of
this manual for any other purpose is specifically prohibited and
its contents are not to be reproduced in full or part without
prior approval of the Technical Publications Department.
Health and safety
the following points must be noted:
• The relevant sections of these instructions must be read
carefully before proceeding.
• Warning labels on containers and packages must be
observed.
•
only be carried out by suitably trained personnel and in
accordance with the information given.
• Normal safety precautions must be taken to avoid the
possibility of an accident occurring when operating in
conditions of high pressure and/or temperature.
•
handling procedures must be used.
• When disposing of chemicals ensure that no two chemicals
Safety advice concerning the use of the equipment described in
To Next Page
Loading...
Need help?
General
