6 CP620, CP630, CP635, CP651, CP661, CP665, CP676
Standards and Approvals
The Control Panels have been designed for installation and use in an industrial environment in compli-
ance with the 2004/108/EC EMC Directive.
The products have been designed in compliance with:
EN 61000-6-4:2007+A1:2011 EN 55011 Class A
EN 61000-6-2:2005 EN 61000-4-2
EN 61000-4-3
EN 61000-4-4
EN 61000-4-5
EN 61000-4-6
The installation of these devices into the residential, commercial and light-industrial environments is al-
lowed only in the case that special measures are taken in order to get ensure conformity
to EN 61000-6-3.
The products are in compliance with the Restrictions on Certain Hazardous Substances (RoHS) Directive
2011/65/EU. In compliance with the above regulations the products are CE marked.
NOTE
If the mounting surface is not plane and robust enough, the degree IP69K is not guaranteed.
A special mounting flange is included to provide the necessary support.
Product Identification
The Control Panel products are identified by a product label. The label reports several information, includ-
ing the model name, the part number, the power supply, the date of production (in the following format:
ywwy) and two barcodes. The first code is the version code, the second one the serial number (S.N.).
Example of product label
Information on type plate (example) Description
CP620 Product type
1SAP520200R0001 Product part number
1231 ywwy – week and year of production
09994971497 Serial number
040100A01000140 Version number of the product
WEB 1.5.15.117 Version number of the MicroBrowser
(only valid for CP6xx-x-WEB)
To Next Page
Loading...
Need help?
General
