English
- 13 -
User manual DWTL1
“Settings” menu allows you to change: language, date, time, daylight saving time (DST), astronomical coordinates,
minimum and maximum duration of the interval between two switchings with random program, ON and OFF duration of
cycle switchings, PIN for keyboard lock.
“Programming” menu allows you to set a new program or to check, to modify or to delete a set program.
“Bluetooth” menu allows you to configure the Bluetooth communication interface.
“Twilight” menu allows to set the operating parameters of the external probe.
“Hour counter” menu allows you to check the operation hours (relay on) of the loads connected to the relays.
“Reset” menu allows you to reset settings, programmed settings, operating hour counter.
“Ver FW” menu allows you to check the firmware version installed on the device.
To Next Page
Loading...
