ABB DWTL1 - Initial Operation; Date and Time Settings; Astronomical and Probe Configuration; Program and Connectivity Settings

English
- 7 -
User manual DWTL1
INITIAL OPERATION
• Once out of the package, DWTL1 is off: press the key and
wait a moment before activating the display
• The set language is English. To change it, press the key
for
at least 3 seconds. Choose among: German, English, Spanish,
French, Italian, Russian and confirm with
.
• Make connections following the diagrams on page 5 of this
manual
• Power DWTL1: the backlighting turns on permanently.
• The presence of the backup battery allows the DWTL1 to have
updated date and time.
To make the other settings follow the following steps:
Date - format: DD/MM/YY
- 1
st
day of the week: Monday
Astronomical coordinates - country: France
- city: Paris
- latitude: North (48° 51’ 36”)
- longitude: East (2° 21’ 00”)
Daylight Saving time (DST)
change: active
- start of daylight saving time (DST):
last Sunday of March at 02:00
o’clock
- end of daylight saving time (DST):
last Sunday of October at 03:00
o’clock
Time correction: - sunrise: +0:00
- sunset: +0:00
Time zone: +1:00 UTC
Parameters of the twilight
probe:
- threshold: 100 lux
- hysteresis: 10 lux
- delay: 1 second
Random switchings: - minimum: 1 minute
- maximum: 5 minutes
Cycle switchings: - ON duration: 1 minute
- OFF duration: 1 minute
PIN protection: disabled (---)
Bluetooth: disabled (Password: 000000)