English
- 47 -
User manual DWTL1
BUS VEMER MENUBLUETOOTH MENU
The Bluetooth menu allows you to enable or disable the Bluetooth interface and change the password used to associate your device (smar-
tphone or tablet) to DWTL1.
The device is supplied with deactivated Bluetooth interface. To activate it, it's enough to access Bluetooth menu and set a password different
from 000000. With Bluetooth menu it's possible to activate or deactivate the interface or change the password.
After changing the password the first time, it's not possible to set the value 000000.
To enable the Bluetooth interface:
set Bluetooth ON
To disable the Bluetooth interface:
set Bluetooth OFF
In this way no communication can take place between your device and DWTL1. DWTL1 works with the settings and programs already set;
any changes or creation of new programs must be made by acting directly on the keyboard of DWTL1.
Warning: to make the Bluetooth interface active, the DWTL1 must be mains powered and connected to the main page (see page 8).
The Bluetooth interface is therefore not active when browsing through the DWTL1 menus.
To Next Page
Loading...
