Installing the Gas Analyzer 43
Uras26: Gas Connections for Pipelines
(internal gas lines executed as stainless steel pipes)
6
Pressure sensor
Design: Screwed fitting with hose nozzle (stainless steel 1.4305/SAE 303) for hose with
4 mm inner diameter (supplied)
11
Sample gas inlet
12
Sample gas outlet with one sample cell
13
Sample gas outlet with two sample cells in
series
Design: 1/8 NPT female thread (stainless steel 1.4305/SAE 303) for threaded
connections (not supplied)
Note: The oxygen sensor, the option "Integrated gas feed" and the version with
separate gas feed paths are not possible.
To Next Page
Loading...
Need help?
General
