EL3060 CONTINUOUS GAS ANALYZERS | OI/EL3060-EN REV. A 17
Preparation for installation
Scope of supply and delivery
Scope of supply and delivery
• Gas analyzer model EL3060
• Accessories pack with:
• DVD-ROM "Software tools and technical documentation"
• Installation instruction
• Analyzer data sheet (see page 33)
• 2 spacer bolts M5 x 100
The spacer bolts are required, in order to install the display and op-
erator control unit at a distance from the open case of the control
unit during service work. They may not be stored under any circum-
stances in the case or in the terminal housing!
• For EL3060-Uras26 in addition: O-ring seal Ø 220 x 3 mm
To Next Page
Loading...
