ABB ETP90H User Manual

Trycktransmitter ETP
Tryck och nivåtransmitter för processindustrin
Transmitter ETP
Pressure and level transmitter for the process industry
Bruksanvisning
Operating Instructions

ABB ETP90H Specifications

General

Product Type	Pressure Transmitter
Model	ETP90H
Manufacturer	ABB
Input	Pressure
Protection	Overpressure protection
Communication Protocol	HART
Output	4-20 mA HART
Housing Material	Stainless Steel
Electrical Connection	M20 x 1.5, 1/2 NPT
Operating Temperature	-40 to 85 °C (-40 to 185 °F)
Material	Stainless Steel
Media	Liquids, gases

Summary

Installation and Commissioning

Safety and Precautions

Essential safety guidelines for safe operation and installation.

Mounting

Operating Conditions at the Installation Site

Defines environmental parameters for proper transmitter installation.

Orientation Dependence

Mounting Transmitter with G 1/2" and NPT 1/2" Process Connection

Mounting Transmitter with Hygienic Process Connection and Flanges

Mounting of Exchangeable Transmitter (code 6)

Changing Exchangeable Transmitters

Mounting G 1 1/2" Transmitter (code 3)

Mounting of Differential Pressure Transmitter (code G and H)

Electrical Connection

Commissioning

Adjusting ETP90A and ETP90H

Guide to setting parameters directly on the device for these models.

Adjusting ETP90PA and ETP90FF

Transmission Data and Influences

Environmental Capabilities

Approvals and Certifications

Explosion Proof Approval

Information on intrinsic safety certification for hazardous areas.

3A Sanitary Approval

Range and Overpressure Limits

Installation Considerations