3. Sensor installation
Safety information
Serious material damage, severe personal injury and/or death can be the result
of not following this instruction. Therefore, the personnel responsible for the
installation of the equipment shall read and follow this instruction carefully.
Handling and maintenance of all the sensors described in this instruction must
be done by personnel trained for this type of work.
WARNING!
All work related to the installation of EXCOUNT-II sensors and the surge
arresters shall be made with de-energized and earthed conductors. Follow all
regulations and rules stated by international or national safety regulations.
Normally, the EXCOUNT-II sensors and the surge arresters operate at a high
voltage. Therefore the sensor must be installed in such a way that only qualified
personnel has access to it.
To Next Page
Loading...