4. Using the transceiver
Important information
Environment
To achieve the best possible lifetime out of your EXCOUNT-II trans-
ceiver, avoid exposure to strong sunlight for extended periods, hot
temperatures (over +50 º C), cold temperatures (under -10 º C ) and
water (the design is showerproof but not watertight).
Cleaning
To clean the transceiver use only a damp soft cloth with a mild detergent.
Changing the battery
The transceiver is powered by a 9 volt battery. Always check the bat-
tery status before going to site to take measurements. Replace it when
necessary with type 6LR61/PP3.
NOTE! Used batteries should NOT simply be thrown away. Return the
battery to a recovery station or leave it with your local ABB representative
for environmentally friendly disposal.
To Next Page
Loading...