EasyManua.ls Logo

ABB Excount II - Safety Information; Key to Symbols; Critical Safety Instructions

ABB Excount II
80 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3
1HSA 801 080-15en EXCOUNT-II Users Manual
Safety information
Key to the symbols
This symbol is a visual notice to avoid mistakes which
can result in damage of the material and/or no function
of the surge arrester monitor EXCOUNT-II.
Read the text carefully and if you don’t understand do not
proceed.
Serious material damage, severe personal injury and/or
death can be the result of not following the information
given beside this symbol. Read the text carefully and if
you don’t understand do not proceed.
Safety instructions
Do not connect the Transceiver to other voltage sources
than a standard 9 volt battery type 6LR61/PP3
Ensure that the battery is connected correctly.
The Transceiver contains a radio transmitter and receiver
which must not be used where the use of radio transmit-
ters or other electronic devices is prohibited.
WARNING!
All work related to the fitting, mounting, assembly or
handling of EXCOUNT-II sensors and the surge arresters
shall be made with disconnected and earthed conduc-
tors. Follow all regulations and rules stated by internatio-
nal or national safety regulations.
Normally, the EXCOUNT-II sensors and the surge arres-
ters operate at a high voltage. Therefore they must be
installed in such a way that only qualified personnel has
access to them.