ABB HT597151 - Malfunctions When Stopping; Table 28: Malfunctions When Stopping - Runout Noises; Table 29: Malfunctions When Stopping - Shortened Runout Time

Operation Manual / 4 Product description / A100-M axial
7 Troubleshooting / 7.4 Malfunctions when stopping
© Copyright 2020 ABB. All rights reserved. HZTL4033_EN Rev.E May 2020
Sporadic surge blows
Surging of the turbocharger can occur during certain operating states, such as when redu-
cing the engine load quickly when manoeuvring. When this happens, the flow direction in the
compressor is momentarily reversed. Such sporadic surge blows do not impair the safe op-
eration of the turbocharger.
¡ A surge blow is accompanied by a loud bang and escape of hot air from the filter silencer.
7.4 Malfunctions when stopping
Runout noises
Possible causes Remedy
Turbochar-
ger
Turbocharger contaminated Clean
Bearing damaged Contact an ABB Turbocharging
Service Station
Rotor rubbing
Foreign object in the turbocharger
Table28: Malfunctions when stopping – Runout noises
Shortened runout time
Possible causes Remedy
Turbochar-
ger
Turbocharger contaminated Clean
Bearing damaged Contact an ABB Turbocharging
Service Station
Rotor rubbing
Foreign object in the turbocharger
Table29: Malfunctions when stopping – Shortened runout time
Page 54 / 113