GILLETTE ŁÓDŹ
Robotic station for packing FFS1 dispensers
2.1 ENTRY
_____________________________________________________________________
overview
Safety information is divided into two categories:
● general safety aspects that should be observed before
performing any service work on the controller. They apply to all
service work and are described in the subsection"General safety
information";
● special safety information indicated in the procedure when a
threat occurs. The method of avoiding and eliminating the
threat is either described in detail in the procedure or described
in detail in separate instructions given in the subsection“2.3
Safety Instructions” on page 16.
ABB Sp. z o.o.
Side 11/135
DTR_GILLETTE_ZSDPD_Farmores1_IRB360_2015_v03
To Next Page
Loading...
