ABB IRB 360 - Page 112

GILLETTE ŁÓDŹ
Robotic station for packing FFS1 dispensers
Figure 60 Location of calamides for lubricating the bearings of the tilting trolley
5. Guides for PUSH and evacuator trolleys
Lubricate the guides directly on the surface. When lubricating, avoid direct contact
of the guide with your hand (corrosion may occur where touched) - it is
recommended to use a latex glove. It is recommended that the guides be covered
with a thin lubricant filter at all times.
Lubrication points
Type of grease
Quantity
Frequency
Carriage guides at the
actuators:
● PS1_PULLER
● PS1_EVACCUATOR1
● PS2_PULLER
● PS2_EVACCUATOR1
Mobilgrease FM
222/Dynalub 510
(DIN Performance
Claim KP2K-20)
Thin layer
Once a month
ABB Sp. z o.o.
Side 112/135
DTR_GILLETTE_ZSDPD_Farmores1_IRB360_2015_v03